Here are a selection of other products you might be interested in, including some similar products, and some related products you might want to consider to complete your look.
Thatch tiles come in lots of different shapes to cover your roof. They also come in a variety of styles.
|
Standard tile |
|
Heavy tile |
|
Corner tiles |
|
Ridge tiles |
|
End Cone |
|
Top cone |
Apply tiles in layers from the bottom of the roof in 30 cm (12″) steps up.
The bottom layer or ‘eve’ of the thatch is made up of Standard Cape Reed Tiles. Each layer going up the roof is also made up of Standard Cape Reed Tiles until you reach the top layer. For the top layer use 2 Heavy Cape Reed Tiles. These are designed to fan out whilst retaining a defined bottom edge (Please note: Heavy tiles are no thicker than the standard tiles and will look no different) At the peak, or ridge of the thatch is the Top Cone, or Ridge Tile and End Cap, dependent on the shape of your roof.
If your roof is square, or has very pronounced hips, you will need Cape Reed Corner Tiles these get you around a 90-degree corners. When calculating your needs, these take the place of 1/3 of a tile from your overall square meterage.
Allow approx. 3.5 tiles per m square (10′ square).
If you would like us to work out how many you require please fill in the form below, and we can estimate it on your behalf. Please measure your roof accurately otherwise your quote will be inaccurate. Please attach a couple of images or send them separately with your name and address so that we can link the images with your form.
Go Back
